油-气-水三相流超声传感器持气率测量*

为探索油-气-水三相流持气率测量难题,该文开展了脉冲透射式超声传感器持气率测量动态实验研究。首先,利用超声传感器与光纤传感器组合,测取了油-气-水三相流中段塞流、混状流、泡状流的响应信号;其次,提取了超声脉冲信号的最大值序列来反映不同流型时超声传感器响应特性,同时,借助双头光纤传感器与相关测速法,计算得到了流体中气泡弦长序列;最后,结合流型与泡径信息,利用超声传感器测量了不同流型下持气率,并分析了不同流型持气率预测的误差来源,为其他油-气-水三相流持气率测量传感器设计提供了借鉴。     

Evaluation of recombinant green fluorescent protein, under various culture conditions and purification with HiTrap hydrophobic interaction chromatography resins

To determine the influence of various culture conditions, transformed cells of Escherichia coli expressing recombinant green fluorescent protein (GFPuv) were grown in nine cultures with four variable conditions (storage of inoculated broth at 4°C prior to incubation, agitation speed, isopropyl-β-d-thiogalactopyranoside [IPTG] concentration, and induction time). The pelleted cells were resuspended in extraction buffer and subjected to the three-phase partitioning (TPP) extraction method. To determine the most appropriate purification resin, protein extracts were eluted through one of four types of HiTrap hydrophobic interaction chromatography (HIC) columns prepacked with methyl, butyl, octyl, or phenyl resins and analyzed further on a 12% sodium dodecylsulfatepolyacrylamidegel. With Coomassie staining, a single band between 27 (standard GFPuv) and 29 kDa (molecular weight standard) was visualized for every HIC column sample. TPP extraction with HIC elution provided about 90% of the GFPuv recovered and eight-fold GFPuv enrichment related to the specific mass. Rotary speed and IPTG concentration showed, respectively, greater negative and positive influences on GFPuv expression at the beginning of the logarithmic phase for the set culture conditions (37°C, 24-h incubation).     

On the three-phase mass transfer with solid particles adhered to the gas-liquid interface

A heterogeneous, multi-layer mass transfer model is proposed for prediction of the effect of multi-layer packing of catalyst particles adhered to the gas-liquid interface. The behavior of the mass transfer rate with respect to the multi-layer packing, to the particle size and mass transfer coefficient without particles is discussed. It is shown that enhancement can be considerably increased by multi-layer packing compared to that of mono-layer packing, depending on the values of particle size and mass transfer coefficient. The predicted mass transfer rates using the proposed model was verified with experimental data taken from the literature. The model presented should be superior to that of published in the literature.     

Some selected problems of nonaqueous microemulsions — phase diagrams and variation of the composition in the quaternary and ternary systems

A variety of quaternary and ternary systems of the type of dodecane/aliphatic alcohols/Na-dodecyl sulphate/water or a water-replacing component (formamide, ethylene glycol, propylene glycol, propylene carbonate, dimethylsulfoxide, acetonitrile) were subjected to a comparative analysis of microemulsification. The compositions of the systems of the type of oil/surfactant/cosurfactant/water or nonaqueous liquid were changed with respect to surfactant (Na-dodecyl sulfate and triton X 114) concentration, cosurfactant (homologous aliphatic alcohols) concentration and mixing ratio of water and water-replacing component. The appertaining phase diagrams were plotted and compared with those of aqueous systems.The experimental results suggest that the phase regions, which are designated as nonaqueous microemulsions, probably represent, not only microemulsions in the usual sense, but a separate kind of mixed phase whose microstructure is examined by special studies. Analogously to aqueous microemulsion systems, transparency and spontaneous formation of homogeneous multicomponent systems cannot serve as the sole criteria for waterless microemulsion formation. But they are important guiding properties of microemulsion formation in multicomponent systems.The variety of components involved in the chemical composition and the current insufficient knowledge do not permit to generally decide whether nonaqueous systems can be assigned to microemulsions or to molecular solutions. For clarifying this problem a detailed examination of the miscibility behavior, especially that of binary systems as a function of temperature, and the role that surfactant and cosurfactant play in the formation of homogeneous systems will be necessary.     

Thermodynamic behavior of adsorption systems with porous adsorbents along the curves describing equilibrium between bulk phases of an adsorptive

The thermodynamic aspects of adsorption equilibrium in systems with crystalline, liquid, and dense gas phases have been considered. The heats of phase transition and corresponding directions of mass transfer from the adsorbed phase into crystalline and liquid phases at different temperatures have been determined. The general equilibrium diagram in the coordinates Inp-T ^–1 has been given with indication of the equilibrium lines of three-phase systems and characteristic points on the isosteres of adsorption,viz., the Gurvitsch and quasicritical points.Deceased.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1480–1485, August, 1995.     

The study of the stability of aqueous three-phase fire-resistant foam in typical liquidus hydrocarbons

The utilization of solid particles in aqueous foam has a great potential in improving fire fighting efficiency. In this study, aqueous foam supported by micro fly-ash (FA) was prepared and its stability in a specific type of oil was characterized. Firstly, different amount of FA was added to study the influence of FA concentration on foamability. It showed that within a specific extent, foam expansion ratio increased with the increasing of FA concentration. And compared with conventional foams, oil resistance of FA stabilized foams, which was investigated by analyzing drainage rate and evolution process with a self-made apparatus, was remarkably improved when FA concentration exceed 4.8wt.%. Secondly, SiO₂ and Al₂O₃ particles with different median sizes were used to study the effect of particle size on stability. However, the smaller hydrophilic particles didn’t behave better as expected. Moreover, the foam stability in three hydrocarbons was evaluated in the same way. The results indicated that the short chain hydrocarbons had much stronger detrimental effect to both two-phase foam and three-phase foam. But overall, the three-phase foam stabilized by FA exhibited much better oil resistance, so it can be used as a promising material for pool fire extinguishing and prevention.GRAPHICAL ABSTRACT     

Laguncularia racemosa Phenolics Profiling by Three-Phase Solvent System Step-Gradient Using High-Performance Countercurrent Chromatography with Off-Line Electrospray Mass-Spectrometry Detection

The detailed metabolite profiling of Laguncularia racemosa was accomplished by high-performance countercurrent chromatography (HPCCC) using the three-phase system n-hexane–tert-butyl methyl ether–acetonitrile–water 2:3:3:2 (v/v/v/v) in step-gradient elution mode. The gradient elution was adjusted to the chemical complexity of the L. racemosa ethyl acetate partition and strongly improved the polarity range of chromatography. The three-phase solvent system was chosen for the gradient to avoid equilibrium problems when changing mobile phase compositions encountered between the gradient steps. The tentative recognition of metabolites including the identification of novel ones was possible due to the off-line injection of fractions to electrospray ionization mass spectrometry (ESI-MS/MS) in the sequence of recovery. The off-line hyphenation profiling experiment of HPCCC and ESI-MS projected the preparative elution by selected single ion traces in the negative ionization mode. Co-elution effects were monitored and MS/MS fragmentation data of more than 100 substances were used for structural characterization and identification. The metabolite profile in the L. racemosa extract comprised flavonoids, hydrolysable tannins, condensed tannins and low molecular weight polyphenols.     

电子束辐照硬铝产生热击波及层裂的估算

 本文对LY-12铝受到强流低能相对论电子束辐照时产生的热击波及层裂效应进行了估算。在预估中等能量沉淀产生材料的动态响应时必须适当地考虑熔化过程。我们所用的状态方程是GRAY三相状态方程，它对熔化区域中的金属作了详细且在热力学上更为完善的描述。将计算值同实验结果进行比较表明，二者基本上是一致的。     

ARC INTERFACE CRACK IN A THREEPHASE PIEZOELECTRIC COMPOSITE CONSTITUTIVE MODEL

An in-depth investigation is made on the problem of an arc-shaped interface insulating crack in a three-phase concentric circular cylindrical piezoelectric composite constitutive model. An exact solution in series form is derived by employing the complex variable method. In addition, the distribution of physical quantities such as stresses, strains, electric displacements and electric fields in the whole field and along the interface is also presented. Explicit expressions for crack opening displacement, jump in electric potential on the crack surface and the electro-elastic field intensity factors at the crack tips are obtained. Specific calculations demonstrate that the convergence of the series form solution is satisfactory and that the outer phase (composite phase) will exert a significant effect on the electro-mechanical coupling response of the composite system. Owing to the fact that stresses and electric displacements still possess conventional inverse square root singularities, the oscillating singularities near the crack tip under plane strain conditions will be absent and, as a result, no unphysical interpenetration phenomenon of the two crack surfaces will occur. In conclusion, the elastic solution obtained is also based on a solid physical foundation. Project supported by the National Natural Science Foundation of China (No.59635140), and the Doctorate Foundation of Xi'an Jiaotong University.